CarPro – Gliss V2 Hyper Slick Top Coating

CarPro – Gliss Hyper Slick Top Coting

CarPro Gliss is a Hyper Slick Top Coating or stand alone product that is incredibly easy to use and gives a smooth, glossy & extremely hydrophobic finish to any paint surface.

CarPro Gliss utilises new advances in nanotechnology and has designed an all-new hyper-smooth, hyper-glossy and easy to apply ceramic nano coating that excels as a top-coat for all CarPro Cquartz coatings.

CarPro GLISS also increases resistance to static buildup, dust retention and many types of mineral and water stains! Combining modified long-chain carbon fluorine polymers and enhanced nano-technology, CarPro Gliss is an evolution in top-coat protection and its immensely tactile feel, achievable on any non porous surface. This next generation coating eventhough works well as a top coating over existing coatings, when used on it’s own offers in excess of 12 months protection.

This incredible next-gen coating serves multiple purposes and even excels as a stand-alone paint protection and enhancement system with a HYPER slick surface that will make your jaw drop!

Kit Includes:

1 x 30ml or 50ml bottle of CQuartz GLISS (20ml+/- per coat)
1 x Applicator Block
4 x 4″ Microfiber Suede Applicators

Features:

• Hyper SLICK and smooth
• Next Generation Top Coat!
• Also works great as a stand-alone Nano-coat!
• Anti-static: Non-oily / resists dust retention
• Adds thickness to your existing coat when used as a top coat
• Enhances resistance to water spots and mineral stains
• Extreme Hydrophobic effect
• Enhances Gloss and life of any ceramic coating

Specifications: 

• Durability: 12+ Months
• Coverage: 20ml per coat +/-
• Water contact angle: 115°
• Recommended working temperatures: 5c – 30c

Directions: (For use as primary coat)

1. Wash with Reset, decontaminate, and polish with a CarPro abrasive polish
2. Wipe down with CarPro Eraser (vehicle must be 100% dry and free of moisture or dew.)
3. Drag two lines of product across length of suede wrapped applicator.
4. Apply evenly across surface, approximately 2 ft x 2 ft section at a time.
5. Add more product to applicator as needed to keep a wet, even application.
6. CarPro Gliss will flash fast and when a white haze forms, immediately wipe off all residues using a microfiber towel. If haze is left on too long then reapply and immediately wipe off.
7. If layering on top of itself, wait 1 hour between coats. If IR cured may repeat immediately.

Total cure time: 12 hours.

Directions: (For use as top coat)

1. May be applied 4 hours or longer after CQuartz.
2. If IR cured may be applied after 45 minutes from CQuartz application