Sale!

GYEON - Prism Mini LED Work Light - Image 2

GYEON – Prism Mini LED Work Light

Original price was: $119.00.Current price is: $83.30.

SKU: Y2XLY 1700407208 Categories: Paint Correction, Polishing Accessories Tag: GYEON

Quality and Affordability Combined
Buy with Confidence, Get Quality
Service with a smile, always online.
Multiple payment options for secure shopping with SSL

Description
Reviews (0)

Gyeon Prism Mini LED Work Light

The Gyeon Prism Mini LED Work Light has been developed together with the leader in professional and automotive refinishing lighting – SCANGRIP. The cooperation between GYEON and SCANGRIP was a very creative designing process. Hence why the PRISM MINI carries the “powered by SCANGRIP” association.

The Gyeon Prism Mini LED Work Light with its reduced size, is the ideal inspection lamp for any professional and enthusiast detailer. Adjustable power output (2 modes) and 2 different light temperatures packed in a robust small case with IP65 water resistance.

The most handy detailing light you can have, with a built in hanger and magnet within the rubber sealed handle.

Colour Temperature: Warm White (4500K) / Cool White (6500K)
Light Output: 100-200LM
COB LED Technology
Built-in magnet and sturdy rotating hook
Solvent resistant glass lens – easily removed for cleaning
3.7V 1600 mAh Li-ion battery
Battery Life: 4 hours at 50% (Step 1), 2 hours at 100% (Step 2)
CE Approved
Recharging time: 4 hours from empty
Recharge method: USB Charging Cable (supplied)
Warranty: 2 years return to base
Supplied with an instruction manual

Usage:

Before use, charge the Gyeon Prism Mini for the first time using the USB charging cable supplied. The first charge will take approximately an hour (when all four battery status indicators turn green). The initial reduced charging time is because the Gyeon Prism Mini is supplied partially charged. Please note that the Prism Mini should not be stored with a flat battery as this can damage the unit. We would recommend you charge it fully every 30 days even when not in use.

The recommended way for highlighting defects is by switching between the two colour temperatures, standing back from the bodywork a distance of 50-100cm and sweeping the beam slowly over the area. Step 1 is for general defect spotting and Step 2 is recommended for checking correction work, but as mentioned it helps to switch between the two.